PRODUCT DESCRIPTION
Make a circleDHLA42 is an electric linear actuator driven by 42 stepper motor, maximum load 400N and maximum speed 80MM/s. The motor end is controlled by a 4-pin lead wire (A+ A- B+ B-), and the screw part is out of the wire. For the three leads (Yellow: Public Port | Red: Lower Limit Switch | White: Upper Limit Switch) to play the role of limit feedback, the stepper motor actuator needs to be matched with the driver and the controller for lifting, and the drive current needs to be greater than 2A. Stepper motor linear actuator are mainly used in 3D printers, inkjet printing, 3D three-dimensional models and other environments that require constant speed adjustment.
TECHNICAL PARAMETERS
| Voltage | DC9-32V |
| Motor | 42HB48 |
| Motor Torque | 0.6NM |
| Maximum Thrust (N) | 300 |
| Max Speed(MM/S) | 60 |
| Inner Tube | Aluminum tube |
| Operating Temperature | 0°C~+40°C |
| Stroke Length | 50mm-800mm |
| Limit Switches | Without (Optional) |
| Lead Screw Type | T Type Five Head Screw Rod |
| IP Grade | IP43 |
| Material | Aluminum |
| Noise | 30dB |
| Mechanical Life | More than 300,00 times |
OUTLINE DIMENSION DRAWING
